Jun 25, 2018 802.3u 10/100 ethernet lan wol supported driver; usb to rs232 prolific driver for windows download; prolific technology inc usb serial controller drivers for mac download; pid 2303 usb drivers for mac; microsoft serial ballpoint driver for windows download; prolific usb to serial win7 drivers for windows; pl2303 mac os x baixar driver.
10.4: Use an IOGear Serial to USB converter cable | 18 comments | Create New Account
Click here to return to the '10.4: Use an IOGear Serial to USB converter cable' hint |
The following comments are owned by whoever posted them. This site is not responsible for what they say.
10.4: Use an IOGear Serial to USB converter cable
I had a situation recently where I needed a non-standard baud rate serial port interface. The only way that I know of do to this is to use a USB-to-serial convertor with the FTDI chipset in it and OS 10.4 (10.0 - 10.3 does not support non-standard baud rates). The prolific chipset found in most USB serial convertors only supports standard baud rates.
The Prolific USB-serial driver is very poor quality. It consumes way too many clock cycles when heavy transfers are in progress, and it will cause a kernel panic if software attempts to select an unsupported baud rate.
I had many problems with the drivers that shipped with the adapter, but I haven't had any problems with these drivers.
10.4: Use an IOGear Serial to USB converter cable
No name USB to Serial cables often use the Prolific chip, but they also sometimes use the Silicon Labs CP2101; namely my T610 USB data cable. Sadly Silicon Labs doesn't give their drivers for download. But I have put up a guide (and instruction for obtaining the drivers) on my page:Getting no name usb to serial adaptors to work on Mac OS X.
---
SnitchCTL : http://snitchctl.smurfturf.net/
PM G4 DP 800 / 1.25gb / 120Gb+80Gb / CD/DVD±RW/RAM/DL
- The only APP Smurf
SnitchCTL : http://snitchctl.smurfturf.net/
PM G4 DP 800 / 1.25gb / 120Gb+80Gb / CD/DVD±RW/RAM/DL
- The only APP Smurf
10.4: Use an IOGear Serial to USB converter cable
Hi All, If you CHANGE the Product & Vendor ID, the driver will then only work with the new product. What you Should Do, is simply ADD a a new DICT for the new product, like this: ---
/Marook
/Marook
10.4: Use an IOGear Serial to USB converter cable
Should the last line of your code be:
<key>0557_2008</key>
and not:
<key>0557_2000</key>
to match the original key?
<key>0557_2008</key>
and not:
<key>0557_2000</key>
to match the original key?
10.4: Use an IOGear Serial to USB converter cable
I've been successfully using these drivers in Tiger since version 1.09b6. Haven't had stability problems as have been mentioned, but I only use it for low-throughput serial connections.
In addition, these drivers allow me to run Virtual PC, install drivers on the PC and OS X side and have a working serial port for the emulated Windows environment.
This kept me from purchasing a PC for my Windows-only ODB II software. For those that don't know, this is software for connecting a computer to a car and reading troubleshooting diagnostic codes and acquiring real-time engine sensor data...saves lots of money on trips to the dealer!
The cable I use was purchased from RAM Electronics. http://www.ramelectronics.net/html/usb_serial.htm
In addition, these drivers allow me to run Virtual PC, install drivers on the PC and OS X side and have a working serial port for the emulated Windows environment.
This kept me from purchasing a PC for my Windows-only ODB II software. For those that don't know, this is software for connecting a computer to a car and reading troubleshooting diagnostic codes and acquiring real-time engine sensor data...saves lots of money on trips to the dealer!
The cable I use was purchased from RAM Electronics. http://www.ramelectronics.net/html/usb_serial.htm
10.4: Use an IOGear Serial to USB converter cable
Oh, and I should mention the drivers work 'out-of-the-box' for the adapter that I bought. No plist tweaking necessary. Not a bad deal for $22.
10.4: Use an IOGear Serial to USB converter cable
Cool on using VirtualPC to talk OBD-II. I'm able to talk to an ECM at 8192 baud OBD-I natively on my iMac inside a Xcode project. (using an FTDI based serial convertor)
10.4: Use an IOGear Serial to USB converter cable
Anyone know of a good vt100 emulator that will support these. I have not found anything to do vt100 emulation using a serial port.
Dale
Dale
10.4: Use an IOGear Serial to USB converter cable
You can try ZTerm ($15 shareware) and minicom (free from darwinports/fink)
Is there anything else that you need to do to enable/setup the USB port-as-serial port??
I see the 'USB device' in the Profiler, and made the product and vendor Id edits to the latest Prolific PL2303 driver (v 1.1). I've unloaded and loaded the .kext file and plugged in the USB cable, but don't get any indicator of activity (the cable LED isn't on) and my application fails to see a serial port.
---
reggie
I see the 'USB device' in the Profiler, and made the product and vendor Id edits to the latest Prolific PL2303 driver (v 1.1). I've unloaded and loaded the .kext file and plugged in the USB cable, but don't get any indicator of activity (the cable LED isn't on) and my application fails to see a serial port.
---
reggie
10.4: Use an IOGear Serial to USB converter cable
Usb Serial Controller C Driver
Hey gang! First of all I am new to this Forum. I am a new Mac Intel user and I came accross this forum about getting the USB-to-Serial adapter to work with OS X.
I have a new Intel Core Duo Macbook 2.0 with OS X 10.4.5 installed. I can not for the likes of me get this GUC232A adapter to work. I know this is a new beast but I welcome any sugestions to get this to work. Here is a brief summary of what I do believe t be working.
1.) System Profilter > USB detects USB-Serial Controller (Version 3, Manufacture - Prolific Technology Inc. Product ID- 0x2008 Vendor ID 0x0557
If install drivers and then try to load kext I get the following.
************** 26com_prolific_driver_PL2303 is not compatible with its superclass, 18IOSerialDriverSync superclass changed? kextload: a link/load error occured for kernel extension /System/Library/Extensions/ProlificUsbSerial.kext load failed for extension /System/Library/Extensions/ProlificUsbSerial.kext (run kextload with -t for diagnostic output) **************
If I use the mentioed -t option
************** kernel extension /System/Library/Extensions/ProlificUsbSerial.kext has problems: Validation failures { 'Executable file doesn't contain kernel extension code' = true } **************
I have tried the driver: PL2303_1.0.8.pkg and PL2303_1.1.0b1.dmg
Neither work.
I have a new Intel Core Duo Macbook 2.0 with OS X 10.4.5 installed. I can not for the likes of me get this GUC232A adapter to work. I know this is a new beast but I welcome any sugestions to get this to work. Here is a brief summary of what I do believe t be working.
1.) System Profilter > USB detects USB-Serial Controller (Version 3, Manufacture - Prolific Technology Inc. Product ID- 0x2008 Vendor ID 0x0557
If install drivers and then try to load kext I get the following.
************** 26com_prolific_driver_PL2303 is not compatible with its superclass, 18IOSerialDriverSync superclass changed? kextload: a link/load error occured for kernel extension /System/Library/Extensions/ProlificUsbSerial.kext load failed for extension /System/Library/Extensions/ProlificUsbSerial.kext (run kextload with -t for diagnostic output) **************
If I use the mentioed -t option
************** kernel extension /System/Library/Extensions/ProlificUsbSerial.kext has problems: Validation failures { 'Executable file doesn't contain kernel extension code' = true } **************
I have tried the driver: PL2303_1.0.8.pkg and PL2303_1.1.0b1.dmg
Neither work.
10.4: Use an IOGear Serial to USB converter cable
same problem here, also on macbookpro. was anyone able to fix this problem?
10.4: Use an IOGear Serial to USB converter cable
I tried installing the drivers on a MacBook Pro and it caused the hang on reboot. It wouldn't get past the gray screen. It was pretty terrifying for a while.
Luckily, I had another mac to mount the MBP (via Target-disk mode). I was able to find the offending KEXT and delete it. Boots fine after that. Whew! If I didn't have another mac to do this with, I'd really be hosed.
Luckily, I had another mac to mount the MBP (via Target-disk mode). I was able to find the offending KEXT and delete it. Boots fine after that. Whew! If I didn't have another mac to do this with, I'd really be hosed.
10.4: Use an IOGear Serial to USB converter cable
i got the same exact problem as above with the SLAB_USBtoUART.kext
i'm using a CP2101 chip with intel MAC Mini 1.5 SOLO - MACOSX 10.4
i'm using a CP2101 chip with intel MAC Mini 1.5 SOLO - MACOSX 10.4
10.4: Use an IOGear Serial to USB converter cable
I finally got this working. There's a new prolific driver available, not to mention a universal binary of minicom. The complete instructions are over at www.ciscoblog.com
10.4: Use an IOGear Serial to USB converter cable
I found that in 'Change Kernel Extension Property List' step 4., the GUC232A was listed as 'Composite Device,' not 'USB-Serial Controller.' If you unplug and re-plug your converter, pressing Command-R (Refresh Information) each time, you should be able to see the corresponding entry disappear and appear.
Also, in step 10., to avoid confusion, the plist file properties are 'idProduct' and 'idVendor.'
Finally, in 'Reload Kernel Extension' step 2., the command as posted failed complaining of '(libkern/kext) not found.'
The following command worked for me (omitted the Contents/Info.plist at the end):
Also, in step 10., to avoid confusion, the plist file properties are 'idProduct' and 'idVendor.'
Finally, in 'Reload Kernel Extension' step 2., the command as posted failed complaining of '(libkern/kext) not found.'
The following command worked for me (omitted the Contents/Info.plist at the end):
sudo kextload /System/Library/Extensions/
ProlificUsbSerial.kext/
File Name: MIDI_Installer-Mac-110806-1.zip
Type: driver
Date: 2011/11/10
Language: english
Version: 1.6.49190
Size: 2.5MB
Platform: Mac OSX
Type: driver
Date: 2011/11/10
Language: english
Version: 1.6.49190
Size: 2.5MB
Platform: Mac OSX
USB MIDI Drivers and ClockWorks for Mac OS X
This installer package (version 1.6.49190) installs updated Mac OS X drivers for all MOTU USB MIDI interfaces, including the USB FastLane, micro lite, MIDI express 128, micro express, MIDI Express XT, and MIDI Timepiece AV. Includes a completely rewritten, Intel-native version of ClockWorks for the MIDI Timepiece AV, MIDI Express XT, micro express and Digital Timepiece. Mac OS X 10.5.8 or later is recommended. Supports Mac OS X 10.8 (Mountain Lion).
To install: unzip archive and double-click installer.
File Name: MIDI_Installer-Win-110806.zip
Type: driver
Date: 2011/08/09
Language: english
Version: 4.0.48697
Size: 29.6MB
Platform: Windows XP, Windows XP Pro, Windows Vista 32-bit, Windows Vista 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows 8 32-bit, Windows 8 64-bit
Type: driver
Date: 2011/08/09
Language: english
Version: 4.0.48697
Size: 29.6MB
Platform: Windows XP, Windows XP Pro, Windows Vista 32-bit, Windows Vista 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows 8 32-bit, Windows 8 64-bit
USB MIDI Installer for Windows
This installer (version 4.0.48697) installs updated drivers for Windows 7, Vista, and XP for all MOTU USB MIDI interfaces, including the USB FastLane, micro lite, MIDI express 128, micro express, MIDI Express XT, and MIDI Timepiece AV. Includes a completely rewritten version of ClockWorks for the MIDI Timepiece AV, MIDI Express XT, micro express and Digital Timepiece. 32-bit and 64-bit PC systems are supported. The minimum required legacy Windows versions are Vista SP2 and XP SP3.
Extract the contents of the ZIP archive to access and run the 'Setup.exe' installer program. The extracted folder contains a README file with installation instructions.
File Name: MOTU_MIDI_Installer-1.5.37320.zip
Type: driver
Date: 2010/01/12
Language: english
Version: 1.5.37320
Size: 1.9MB
Platform: Mac OSX
Type: driver
Date: 2010/01/12
Language: english
Version: 1.5.37320
Size: 1.9MB
Platform: Mac OSX
USB MIDI OSX Drivers and ClockWorks for OSX 10.4
This installer includes USB MIDI Drivers for Mac OS X for use with MOTU USB interfaces including the USB Fastlane, micro lite, express 128, micro express, Express XT and MIDI Timepiece AV. The install also contains the ClockWorks software console. Use this installer if you are running OSX 10.4.
To install: unzip archive and double-click installer.
File Name: usbx_1.37.zip
Type: driver
Date: 2010/01/01
Language: english
Version: 1.37
Size: 1.8MB
Platform: Mac OSX
Type: driver
Date: 2010/01/01
Language: english
Version: 1.37
Size: 1.8MB
Platform: Mac OSX
USB MIDI OSX Drivers and ClockWorks for OSX 10.3
This installer includes USB MIDI Drivers for Mac OS X for use with MOTU USB interfaces including the USB Fastlane, micro lite, express 128, micro express, Express XT and MIDI Timepiece AV. The install also contains the ClockWorks software console. Use this installer if you are running OSX 10.3.
To install: unzip archive and double-click installer.
File Name: SETUPMIDI_2.51.zip
Type: driver
Date: 2004/09/22
Language: english
Version: 2.51
Size: 1.9MB
Platform: Windows XP, Windows 2000, Windows ME
Type: driver
Date: 2004/09/22
Language: english
Version: 2.51
Size: 1.9MB
Platform: Windows XP, Windows 2000, Windows ME
WDM MIDI Drivers for MOTU USB and Parallel Interfaces
WDM Drivers for MOTU USB compatible with all MOTU USB & parallel MIDI interfaces including Fastlane, mico lite, Express 128, micro express, Express XT and MTP AV. USB drivers are Windows ME, 2000 and XP compatible. Clockworks DTP support has been recently added. Refer to Clockworks manual link below.
Unzip and run installer.
File Name: fm1.48.hqx
Type: application
Date: 2003/11/05
Language: english
Version: 1.48
Size: 4.8MB
Platform: Mac OS9
Type: application
Date: 2003/11/05
Language: english
Version: 1.48
Size: 4.8MB
Platform: Mac OS9
FreeMIDI 1.48/USB MIDI Installer
This is the FreeMIDI installer for Mac OS9. This install contains drivers and consoles for all MOTU MIDI interfaces, serial and USB.
Double-click to install.
File Name: midiex.sit.hqx
Type:
Date: 2000/11/28
Language:
Version:
Size: 0.0MB
Platform:
Type:
Date: 2000/11/28
Language:
Version:
Size: 0.0MB
Platform:
MIDIEx .SYX file loader profile
This Unisyn profile will open a .SYX format file and send the data to a selectable FreeMIDI device. At that point, you can use the proper Unisyn device profile to get the data back and you have converted the .SYX file into a Unisyn bank. <br><br>To open a .SYX file, the file must have .SYX appended to the file name and yes, it must be in all uppercase letters.<br><br>This profile is an UNSUPPORTED extra. Requests to tech support regarding this profile will be cheerfully ignored. The normal liability caveats written inside the front cover of your Unisyn manual apply. In short, you’re on your own. Enjoy!<br>
File Name: MotuUSB.exe
Type: driver
Date: 2000/11/20
Language: english
Version: 1.0
Size: 0.32MB
Platform: Windows 98
Type: driver
Date: 2000/11/20
Language: english
Version: 1.0
Size: 0.32MB
Platform: Windows 98
Windows 98 USB Driver Install for MIDI Timepiece AV
Usb Serial Controller D Mac Os X
This USB Driver install is compatible with Windows-updated hardware. Windows-updated hardware contain 'M/W' indicators on the bottom of the USB MTP AV. Hardware packaged specifically for Macintosh requires the updated ROM chip. Click link below to order.
This driver is compatible with Windows 98 (2nd Edition recommended), and Windows Me.
This driver is compatible with Windows 98 (2nd Edition recommended), and Windows Me.
Run MotuUSB.exe archive to expand install folder named 'USB Driver Install' Connect your USB MIDI interface and power on. Hardware Wizard will detect new device. Add USB Composite device and search the 'USB Driver Install' folder for driver.
File Name: ClockWorks 1.07
Type: application
Date: 2000/09/28
Language: english
Version: 1.07
Size: 1.3MB
Platform: Mac OS9
Type: application
Date: 2000/09/28
Language: english
Version: 1.07
Size: 1.3MB
Platform: Mac OS9
ClockWorks 1.07 Console Only
ClockWorks console for all MOTU interfaces for the Mac
Copy console to hard drive.
File Name: avcon_se.exe
Type: driver
Date: 1998/03/20
Language: english
Version: 1.11/1.04
Size: 0.54MB
Platform: Windows 98
Type: driver
Date: 1998/03/20
Language: english
Version: 1.11/1.04
Size: 0.54MB
Platform: Windows 98
MIDI Timepiece AV Console and Driver
MTP AV Parallel installer for Windows 95 and 98.
If you want the console and driver for your MIDI Timepiece AV, this download is all you'll need. This self-extracting file contains the Windows console program (v1.10) and driver (v1.04) for the MIDI Timepiece AV. This update console adds Quicklock support as well as display improvements.
If you want the console and driver for your MIDI Timepiece AV, this download is all you'll need. This self-extracting file contains the Windows console program (v1.10) and driver (v1.04) for the MIDI Timepiece AV. This update console adds Quicklock support as well as display improvements.
To properly expand the MIDI Timepiece AV Setup files you must place /d after the command to run mxpcn_se.exe . So, if the file is in a folder on the C drive called console, the command to properly expand the files would be c:consoleavcon_se.exe /d
Once you have retrieved and decompressed this download, read the README.WRI file and run SETUP.EXE.
Once you have retrieved and decompressed this download, read the README.WRI file and run SETUP.EXE.
File Name: micro_se.exe
Type: driver
Date: 1998/03/20
Language: english
Version: 1.0
Size: 0.56MB
Platform: Windows ME, Windows 98
Type: driver
Date: 1998/03/20
Language: english
Version: 1.0
Size: 0.56MB
Platform: Windows ME, Windows 98
micro express Driver (Parallel)
This is the original parallel 95/98/ME drivers for the micro.
Double-click to install.
File Name: xtcon_se.exe
Type: driver
Date: 1998/03/20
Language: english
Version: 1.02
Size: 0.56MB
Platform: Windows 98
Type: driver
Date: 1998/03/20
Language: english
Version: 1.02
Size: 0.56MB
Platform: Windows 98
MIDI Express XT Console and Driver
This self-extracting file contains the version 1.02 of the MIDI Express XT console program and driver.
IMPORTANT: to properly expand the MIDI Express XT Setup files you must place /d after the command to run xtcon_se.exe . So, if the file is in a folder on the C drive called console, the command to properly expand the files would be c:consolextcon_se.exe /d
File Name: ExpressMTPCon.sea.hqx
Type: application
Date: 1997/11/27
Language: english
Version: 2.03
Size: 0.38MB
Platform: Mac OS9
Type: application
Date: 1997/11/27
Language: english
Version: 2.03
Size: 0.38MB
Platform: Mac OS9
Express MTP Console
(compatible with MIDI Timepiece I, II or AV serial and requires FreeMIDI)
Expand and copy console to hard drive.
File Name: mxpcn_se.exe
Type: driver
Date: 1997/10/31
Language: english
Version: 1.1
Size: 0.7MB
Platform: Windows 98
Type: driver
Date: 1997/10/31
Language: english
Version: 1.1
Size: 0.7MB
Platform: Windows 98
MIDI Express PC console and all drivers
This self-extracting file contains the latest version of the Windows console program for the MIDI Express PC. This version of the console can be used with any MIDI Express PC Windows MIDI driver. Included in this download are the latest drivers for the 8-bit and 16-bit MIDI Express PC expansion cards (the same drivers available elsewhere on this page). You do not need to download individual MIDI Express PC driver updates if you download this file.
IMPORTANT: to properly expand the MIDI Express PC Setup files you must place /d after the command to run mxpcn_se.exe . So, if the file is in a folder on the C drive called console, the command to properly expand the files would be c:consolemxpcn_se.exe /d
Once you have retrieved and decompressed this download, read the README.WRI file and run SETUP.EXE.
Once you have retrieved and decompressed this download, read the README.WRI file and run SETUP.EXE.
File Name: mxp16_se.exe
Type: driver
Date: 1997/10/31
Language: english
Version: 2.13
Size: 0.04MB
Platform: Windows 98
Type: driver
Date: 1997/10/31
Language: english
Version: 2.13
Size: 0.04MB
Platform: Windows 98
MIDI Express PC (16-bit card) driver
Windows MIDI driver for MIDI Express PC interfaces with 16-bit cards. This driver will not work with any card other than the 16-bit type.
This version of the driver contains MIDI input timing improvements. Also, connecting to the MIDI Express PC and saving/restoring of its internal state during each Windows session have both been made more reliable. Compatibility with 32-bit MIDI programs running on Windows 95 has been improved as well.
This version of the driver contains MIDI input timing improvements. Also, connecting to the MIDI Express PC and saving/restoring of its internal state during each Windows session have both been made more reliable. Compatibility with 32-bit MIDI programs running on Windows 95 has been improved as well.
IMPORTANT: to properly expand the MIDI Express PC files you must place /d after the command to run mxp16_se.exe . So, if the file is in a folder on the C drive called console, the command to properly expand the files would be c:consolemxp16_se.exe /d
File Name: mtpcn_se.exe
Type: driver
Date: 1997/10/17
Language: english
Version: 1.1
Size: 0.51MB
Platform: Windows 98
Type: driver
Date: 1997/10/17
Language: english
Version: 1.1
Size: 0.51MB
Platform: Windows 98
MIDI Time Piece II console and all drivers
If you want the console and driver for your MIDI Time Piece II, this download is all you'll need. This self-extracting file contains the latest version of the Windows console program for the MIDI Time Piece II. This version of the console can be used with any MIDI Time Piece II Windows MIDI driver. Included in this download are the latest drivers for the 8-bit, 16-bit and PC Link types of MIDI Time Piece II expansion cards (the same drivers available elsewhere on this page). You do not need to download individual MTP II driver updates if you download this file.
Once you have retrieved and decompressed this download, read the README.WRI file and run SETUP.EXE.
File Name: mtpcl_se.exe
Type: driver
Date: 1997/10/17
Language:
Version: 2.03
Size: 0.06MB
Platform: Windows 98
Type: driver
Date: 1997/10/17
Language:
Version: 2.03
Size: 0.06MB
Platform: Windows 98
MIDI Time Piece II (PC Link card) driver
This self-extracting file contains the Windows MIDI driver for MIDI Time Piece II interfaces with PC Link cards. This driver will not work with any card other than the PC Link type. In this version of the driver, compatibility with 32-bit MIDI programs running on Windows 95 has been improved.
File Name: mtpcl_se.exe
Type:
Date: 1997/10/17
Language:
Version: 1.52
Size: 0.04MB
Platform: Windows 98
Type:
Date: 1997/10/17
Language:
Version: 1.52
Size: 0.04MB
Platform: Windows 98
MIDI Time Piece II (16-bit card) driver
This self-extracting file contains the Windows MIDI driver for MIDI Time Piece II interfaces with 16-bit cards. This driver will not work with any card other than the 16-bit type.
The version of the driver includes more reliable 'networking' of two MIDI Time Piece units for access to additional MIDI ports. Compatibility with 32-bit MIDI programs running on Windows 95 has also been improved.
The version of the driver includes more reliable 'networking' of two MIDI Time Piece units for access to additional MIDI ports. Compatibility with 32-bit MIDI programs running on Windows 95 has also been improved.
File Name: mxp8__se.exe
Type: driver
Date: 1997/10/17
Language:
Version: 1.40
Size: 0.04MB
Platform: Windows 98
Type: driver
Date: 1997/10/17
Language:
Version: 1.40
Size: 0.04MB
Platform: Windows 98
MIDI Express PC (8-bit card) driver
Windows MIDI driver for MIDI Express PC interfaces with 8-bit cards. This driver will not work with any card other than the 8-bit type. This driver has been tested with 16- and 32-bit MIDI programs running on Windows 95.
IMPORTANT: to properly expand the MIDI Express PC files you must place /d after the command to run mxp8_se.exe . So, if the file is in a folder on the C drive called console, the command to properly expand the files would be c:consolemxp8_se.exe /d
File Name: mxncn_se.exe
Type: driver
Date: 1997/10/17
Language:
Version: 1.11/2.03
Size: 0.51MB
Platform: Windows 98
Type: driver
Date: 1997/10/17
Language:
Version: 1.11/2.03
Size: 0.51MB
Platform: Windows 98
MIDI Express PC Notebook update
console version 1.11 with driver version 2.03
Windows console program for the MIDI Express PC Notebook. This version of the console can be used only with the latest version of the driver, which is included with this download.
This update corrects aspects of the previous version of the console that prevent it from running on Windows 95. Also, driver changes include improved compatibility with 32-bit MIDI programs running on Windows 95. Although it mainly addresses Windows 95 issues, this update is also recommended for Notebook users running Windows 3.1 or Windows for Workgroups.
Windows console program for the MIDI Express PC Notebook. This version of the console can be used only with the latest version of the driver, which is included with this download.
This update corrects aspects of the previous version of the console that prevent it from running on Windows 95. Also, driver changes include improved compatibility with 32-bit MIDI programs running on Windows 95. Although it mainly addresses Windows 95 issues, this update is also recommended for Notebook users running Windows 3.1 or Windows for Workgroups.
IMPORTANT: to properly expand the MIDI Express PC files you must place /d after the command to run mxpcn_se.exe . So, if the file is in a folder on the C drive called console, the command to properly expand the files would be c:consolemxpcn_se.exe /d
Once you have retrieved and decompressed this download, read the README.WRI file and run SETUP.EXE.
Once you have retrieved and decompressed this download, read the README.WRI file and run SETUP.EXE.
File Name: fly104.exe
Type: driver
Date:
Language:
Version: 1.04
Size: 0.06MB
Platform: Windows 98
Type: driver
Date:
Language:
Version: 1.04
Size: 0.06MB
Platform: Windows 98
PC-MIDI Flyer/Pocket Express Driver
This self-extracting file contains the latest version of the Windows MIDI driver for the PC-MIDI Flyer and Pocket Express. This version of the driver improves compatibility with the PC MIDI Flyer under Windows 98. <br><br>IMPORTANT: to properly decompress the necessary files to C:FLYER, simply double-click on the downloaded file and press the Unzip button. Then follow the normal installation<br>procedures. After selecting the Have Disk button, type C:FLYER, and click OK to continue with the installation steps.